KUBLAI S1 Electric Squirt Automated Refill Water Gun

This blaster can only ship to USA, European union countries, Russia, Chile

Features

• The S1 switch and charging port are at the bottom of the rear tail support. Press briefly for 1s to release, and the screen will light up to start up. Press and hold for 3s after starting up to shut down.

• Please use the charger above 2a and the type C power cord to charge S1.

• When the water storage of S1 is less than 30%, just dip the front of the S1 into a water source and fully load and repressurize automatically to reload.

• Please inject clean water instead of seawater, river water and other liquids.

• Pull the trigger S1 to launch.Pull the trigger and hold it for 3 seconds,release the trigger after the S1 launch switch is prompted, and you will get a larger water output shot.

• be careful! When S1 is not used for more than 1 hour, it is necessary to shoot all the water out for storage and turn off the power.

• S1 needs to be stored in a cool and dry place to avoid damage to S1 caused by exposure and soaking.

• be careful! Do not shoot at vulnerable parts of the human body at close range, such as eyes, ears, etc.